TASER Target Frame Setup: Get Your Practice Area Ready

Quick answer

Set up your TASER Target Frame on level ground with a solid backstop, then hang conductive carbon ink Practice Target paper on it. Keep the frame at least 10 feet from your firing position, check stability before each session, and store it indoors to protect the frame and targets.

Where should you place a TASER target frame?

Choose a flat, stable surface with a safe backstop behind the frame, such as a dirt berm or heavy wall. Position the frame so your firing line is clear of people, pets, and traffic, and verify local laws allow practice in that location. Keep the frame at least 10 feet from your firing position to reduce misfire risk and give yourself room to draw and aim.

How do you assemble and hang the frame?

The TASER Target Frame comes as a professional 27.5-inch by 75-inch target frame. Assemble it according to the included instructions, then secure the base so it cannot tip. Hang a Practice Target sheet on the frame using tape or clips, centering it at chest height for realistic aim. The conductive carbon ink paper visibly displays electricity during practice, helping you confirm proper technique and aim.

What should you check before each practice session?

Inspect the frame for loose joints, bent parts, or a weakened base, and tighten or replace hardware as needed. Confirm the backstop is intact and that no one has entered the area behind the target. Check that your TASER device and cartridges are in good condition, and wear eye protection. If the frame wobbles or the target paper tears, replace or re-secure it before continuing.

How do you maintain the frame and targets?

Wipe the frame with a dry cloth after use to remove dust and moisture, and store it indoors when not in use. Keep spare Practice Target sheets in a dry place so the conductive carbon ink stays effective. Periodically inspect the frame for rust or cracks, and replace any worn parts. With regular care, the frame and targets will support consistent training.

TASER Target Frame FAQ

Can I leave the frame outside?

The frame is not described as weatherproof, so prolonged exposure to rain or sun may damage it. Store it indoors or under cover when not in use. Bring it in after each session.

How far away should I stand?

A minimum of 10 feet from the frame is a safe starting distance for most practice. Check your device manual for any specific recommendations. Start at 10 feet and adjust as you improve.

What targets work with the frame?

The frame is designed to hold target sheets; the Practice Target with conductive carbon ink is a compatible option that shows electrical activity. Other paper targets may also fit if they are large enough. Use conductive carbon ink paper for clear feedback.

Product facts

• TASER Target Frame: TASER Target Frame measures 27.5 inches by 75 inches and is compatible with TASER Self-Defense devices. The large professional-sized surface gives you a realistic target area for honing aim and confidence.
• Practice Target: Practice Target features conductive carbon ink paper that visibly displays electricity during practice. You get immediate visual feedback on shot placement and technique without needing a separate scoring system.